WARRANTY REFURBISHED NEW BRUNSWICK I26 INCUBATOR SHAKER WATCH-VIDEO FREE-SHIP

Name: WARRANTY REFURBISHED NEW BRUNSWICK I26 INCUBATOR SHAKER WATCH-VIDEO FREE-SHIP
Brand: EachProject
SKU: IF_77B6078D-3-1-4-1-1-1-2-1-1-1-1-1-2-1-1-1-2-1--1
Price: 4500.00 USD
Availability: OutOfStock

$4,500.00 USD

Sale Sold out

Taxes included.

We're proud to offer a Great Operational Condition REFURBISHED EPPENDORF NEW BRUNSWICK I26 INCUBATOR SHAKER with FLASK CLAMPS & MANUAL as can be WATCHED IN THE VIDEO and also seen in the pictures.

FEEL FREE TO WATCH A VIDEO OF THIS UNIT WORKING BY CLICKING: https://www.youtube.com/watch?v=wgS5gh4KXsY

Also includes the FLASK CLAMPS and the OPERATIONAL MANUAL.

Fully Tested and Working Without Issue: That's why we offer a 120-Day Warranty!

After its initial disinfection and inspection, our technicians tested the EPPENDORF NEW BRUNSWICK I26 INCUBATOR SHAKER with FLASK CLAMPS & MANUAL with the following results:

- Ran rpm: PASSED

- No excessive noise or imbalance: PASSED

- Shaker Speed Up and Down properly: PASSED

- Achieved Maximum Heat: PASSED

- Performed inspection; NO PROBLEM FOUND: PASSED

Specifications:

Fully Re-Certified and Tested to Perform at Manufacturer Specifications

Incubator Shaker Inspection and Recertification Checklist

- Inspected Chamber Glass for Cracks or Chips

- Inspected Door Seals as Needed

- Inspected Display for Any Dim/Dead Pixels

- Confirmed Full Functionality of All Buttons

- Inspected All Platform Assembly Bearings

- Inspected Drive Belt for Tears or Cracks

- Inspected All Wiring for Frays, Tears, Or Breakages

- Checked All PCB Test Points for Any Malfunctioning Components

- Confirmed Correct Tension on Drive Belt

- Confirmed Compressor Functionality and Cleaned Condenser Filter/Fins

- Confirmed Internal Temperature with NIST Temperature Probe

- Confirmed Platform RPM’s with NIST Tachometer

- Ensured Cosmetics Are Acceptable

IMPORTANT:AS CAN BE SEEN IN THE VIDEO AND ALSO IN THE PICTURES, THIS REFURBISHED NEW BRUNSWICK I26 INCUBATOR SHAKER ALSO COMES WITH THE SIX FEET EVEN THOUGH ONE DOES NOT COME WITH THE RUBBER BASE AS SHOWN IN THE PICTURE, DOESN'T AFFECT VIBRATION OR OPERATION AT ALL BUT WE THOUGHT IT IMPORTANT TO MEENTION.

THIS UNIT RESPONDS TO ALL SETTINGS, THE DISPLAY DOES WORK AS CAN BE WATCHED IN THE VIDEO.

THIS UNIT CAME FROM A FEDERAL UNIVERSITY, HAS ALWAYS BEEN VERY WELL TAKEN CARE OF.

HAS BEEN FULLY REFURBISHED BY TECHNICAL ALTERNATIVES WHO SERVICES ALL SHAKER INCUBATORS AT THE UNIVERSITY AND IS WORKING PERFECTLY AS SHOWN IN THE VIDEO AND THAT'S WHY WE OFFER A 120-DAY-WARRANTY ON IT!!!

IF BUYER WISHES WE CAN ALSO HAVE ONE OF OUR TECHNICAL ENGINEERS INSTALL IT AT YOUR LOCATIONS FOR A FEE. FEE WILL DEPEND ON BUYER'S LOCATION.

FREE SHIPPING TO ANY CONTINENTAL USA BUSINESS LOCATION WHERE BUYER CAN UNLOAD IT OFF THE DELIVERY FREIGHT TRUCK!

IF BUYER DOES NOT HAVE THE MEANS TO UNLOAD IT AT DELIVERY (NO DOCK or FORKLIFT) THEN THERE WILL BE A $150 SPECIAL LIFTGATED FREIGHT TRUCK DELIVERY FEE.

Similar Brand new units similar to these Retail new for over US$ 25.000,00 so this is the chance to buy one at a Great Deal!!!

Technical Information in Italics Blue below was taken from Manufacturer's website:

Eppendorf New Brunswick™ I26 incubator shakers are stackable

The Eppendorf New Brunswick™ I26 are stackable incubator shakers that feature a cast iron Eppendorf triple-eccentric counterbalanced drive which provides vibration- and trouble-free operation for years. Microprocessor controls with digital display enable easy operation and accurate setpoint regulation. A large assortment of platforms, clamps, test tube holders and other accessories allow configuration to meet your exact needs. Based on the design concepts of the Innova shakers, the I26 and I26R offer excellent performance at a value price.

The slide-out platform provides easy access to all samples, including ones located in the back.

A versatile accessory platform (sold separately) accommodates flasks up to 2.8 L.

Slide-out platform

Stackable up to 3 units

User-friendly keypad with large LED display

Triple-eccentric counterbalanced drive and cast iron housing

Calibrate speed and temperature directly through keypad

These specifications assume a maximum load of 15.5 kg (34 lb), including platforms, clamps, glassware,

and contents.

Shaking

Speed • Single unit: 25 – 400 rpm

• 2 or 3 units stacked: 25 – 250 rpm

Control accuracy • ±1 rpm

Indication • 3 digit LED, in 1 rpm increments

Stroke/orbit • 2.5 cm (1 in)

Temperature

I26 range • 5 °C above ambient temperature to 60 °C

Control accuracy • ±0.1 °C from 30 °C – 40 °C, ±0.5 °C over the remaining range

Indication • 3 digit LED, in 1 rpm increments

Heaters • Long-life, low-watt density resistance type heaters with high temperature

thermostats

Dimensions and weight

Width 127 cm (50 in) 127 cm (50 in) 127 cm (50 in)

Depth 77 cm (30.26 in) 77 cm (30.26 in) 77 cm (30.26 in)

Height 70 cm (27.56 in) 140 cm (52.62 in) 210 cm (77.68 in)

Chamber width • 86.4 cm (34 in)

Chamber depth • 58.4 cm (23 in)

Chamber height • 39.4 cm (15.5 in) clearance above platform

Platform width • 76 cm (30 in)

Platform depth • 46 cm (18 in)

Weight • I26 weight: 167.8 kg (370 lb)

Altitude limit • 2000 m

SHIPPING IS FREE TO BUSINESS LOCATIONS (not home business) with a dock or a forklift to unload it off the truck. If you need a special Liftgated delivery there will be a $150 delivery fee charged.

Shipping is also Free if buyer can pick it up at the local Freight Terminal we ship it to.

IMPORTANT: SCHOOLS, CHURCHES, FARMS AND RESIDENCES ARE NOT CONSIDERED BUSINESS LOCATIONS BY ALL FREIGHT CARRIERS AND WILL HAVE THE $150 DELIVERY FEE.

Additional images are available upon request. All items can be viewed in person at our showroom in Toledo, OH.

STOCK # 242509