1
/
of
13
WARRANT REFURBISHD NEW BRUNSWICK EXCELLA E24 INCUBATOR SHAKER WATCHVIDEOFREESHIP
WARRANT REFURBISHD NEW BRUNSWICK EXCELLA E24 INCUBATOR SHAKER WATCHVIDEOFREESHIP
Regular price
$3,500.00 USD
Regular price
Sale price
$3,500.00 USD
Taxes included.
We're proud to offer a Great Operational Condition REFURBISHED EPPENDORF NEW BRUNSWICK EXCELLA E24 INCUBATOR SHAKER with FLASK CLAMPS & MANUAL as can be WATCHED IN THE VIDEO and also seen in the pictures.
FEEL FREE TO WATCH A VIDEO OF THIS UNIT WORKING BY CLICKING: https://www.youtube.com/watch?v=rw8ugOdlkyU
Both Shock Absorbers have been replaced, are Brand New Hold Air and the Lid without any problems as can be shown in the Pictures and the Video also!
Also includes the FLASK CLAMPS and the OPERATIONAL MANUAL.
Fully Tested and Working Without Issue: That's why we offer a 120-Day Warranty!
After its initial disinfection and inspection, our technicians tested the EPPENDORF NEW BRUNSWICK EPPENDORF EXCELLA E24 INCUBATOR SHAKER with FLASK CLAMPS & MANUAL with the following results:
- Ran rpm: PASSED
- No excessive noise or imbalance: PASSED
- Shaker Speed Up and Down properly: PASSED
- Achieved Maximum Heat: PASSED
- Performed inspection; NO PROBLEM FOUND: PASSED
Specifications:
Fully Re-Certified and Tested to Perform at Manufacturer Specifications
Incubator Shaker Inspection and Recertification Checklist
- Inspected Chamber for Cracks or Chips
- Inspected Chamber Seals as Needed
- Inspected Display for Any Dim/Dead Pixels
- Confirmed Full Functionality of All Buttons
- Inspected All Platform Assembly Bearings
- Inspected Drive Belt for Tears or Cracks
- Inspected All Wiring for Frays, Tears, Or Breakages
- Checked All PCB Test Points for Any Malfunctioning Components
- Confirmed Correct Tension on Drive Belt
- Confirmed Compressor Functionality and Cleaned Condenser Filter/Fins
- Confirmed Internal Temperature with NIST Temperature Probe
- Confirmed Platform RPM’s with NIST Tachometer
- Ensured Cosmetics Are Acceptable
IMPORTANT:AS CAN BE SEEN IN THE VIDEO AND ALSO IN THE PICTURES, THIS REFURBISHED EPPENDORF NEW BRUNSWICK EXCELLA E24 INCUBATOR SHAKER ALSO COMES WITH THE FOUR FEET AS SHOWN IN THE PICTURE.
THIS UNIT RESPONDS TO ALL SETTINGS, THE DISPLAY DOES WORK AS CAN BE WATCHED IN THE VIDEO.
THIS UNIT CAME FROM A FEDERAL UNIVERSITY, HAS ALWAYS BEEN VERY WELL TAKEN CARE OF.
HAS BEEN FULLY REFURBISHED BY TECHNICAL ALTERNATIVES WHO SERVICES ALL SHAKER INCUBATORS AT THE UNIVERSITY AND IS WORKING PERFECTLY AS SHOWN IN THE VIDEO AND THAT'S WHY WE OFFER A 120-DAY-WARRANTY ON IT!!!
FREE SHIPPING TO ANY CONTINENTAL USA BUSINESS LOCATION WHERE BUYER CAN UNLOAD IT OFF THE DELIVERY FREIGHT TRUCK!
IF BUYER DOES NOT HAVE THE MEANS TO UNLOAD IT AT DELIVERY (NO DOCK, FORKLIFT OR TWO STRONG GUYS) THEN THERE WILL BE A $150 SPECIAL LIFTGATED FREIGHT TRUCK DELIVERY FEE.
Similar Brand new units similar to these Retail new for over US$ 15.000,00 so this is the chance to buy one at a Great Deal!!!
Technical Information in Italics Blue below was taken from Manufacturer's website:
fishersci.com/shop/products/new-brunswick-scientific-excella-e24-e24r-temperature-controlled-benchtop-shakers-4/p-3015445
Eppendorf™ Scientific Excella™ E24 Temperature-Controlled Benchtop Shaker
Accepts vessels up to 2.8L
Specifications
Orbit 19 mm
Speed Range 50 to 400 rpm
Electrical Requirements 120 V, 60 Hz
Voltage 120 V
Frequency 60 Hz
Description/Operating Features
Flask capacity: 10mL to 2.8L
Shaking speed range: 50 to 400rpm
Shaking orbit: 0.75 in. dia. (19mm)
Digital keypad control and LED display for speed, run time, alarms and temperature
Timer: 0.1 to 99.9 hours
LED indicates temperature settings in 0.1°C increments
Powerful UniCentric drive is counterbalanced for continuous-duty shaking over a wide range of speed
Microprocessor feedback-control maintains precise shaking speed
Large-capacity circulating fan distributes air evenly throughout chamber to ensure accurate temperature control and rapid thermal recovery
Safety Features
Automatic shutoff when lid is opened
Automatic restart with settings stored in memory
Maintains speed even with unbalanced loads
Visual and audible warning signals when speed deviates more than 5rpm, or temperature more than 1°C, from setpoint
Dependable and affordable shakers for reproducible cell growth
Featuring a heavy-duty drive and cool-running motor for long life and quiet operation under heavier loads and higher speeds.
Intuitive, spill-proof keypad allows easy input of parameters
0.56 in. (1.4cm) LED display shows running conditions and diagnostics
UniCentric™ drive and brushless DC motor ensure quiet, vibration-free operation
Versatile—use same accessories as other New Brunswick Scientific shakers
Incubated Model E24
Temperature Range: 7°C above ambient to 60°C
Net weight: 135 lb. (61.2kg).
Incubated and Refrigerated Model E24R
Temperature Range: 15°C below ambient to 60°C
Net weight: 180 lb. (81.6kg)
Order Info
Dimensions, Platform: 18L x 18 in. W (46 x 46cm); Chamber: 20.25L x 21.5W x 14 in. H (51.4 x 54.6 x 35.8cm); Overall: 22L x 30W x 24 in. H (56 x 76.2 x 61cm). For 120V 60Hz; accessory platforms, trays and racks sold separately.
Service Plan
Service agreement available.
Certifications
UL listed. CSA approved. CE marked.
Warranty and Services
SHIPPING IS FREE TO BUSINESS LOCATIONS (not home business) with a dock or a forklift to unload it off the truck. If you need a special Liftgated delivery there will be a $150 delivery fee charged.
Shipping is also Free if buyer can pick it up at the local Freight Terminal we ship it to.
IMPORTANT: SCHOOLS, CHURCHES, FARMS AND RESIDENCES ARE NOT CONSIDERED BUSINESS LOCATIONS BY ALL FREIGHT CARRIERS AND WILL HAVE THE $150 DELIVERY FEE.
Additional images are available upon request. All items can be viewed in person at our showroom in Toledo, OH.
STOCK # 242509
Quantity
Couldn't load pickup availability
Low stock: 1 left
View full details
