THERMO IEC GP8R REFRIGERATED CENTRIFUGE with 216 SWING ROTOR WATCHVIDEO FREESHIP

TECHNICAL INFORMATION ABOUT THIS WX ULTRA-80 IN ITALICS BLUE BELOW WAS TAKEN FROM THE WEB:

The Thermo IEC Centra GP8R Refrigerated Benchtop Centrifuge is a general purpose centrifuge for use in industrial, medical and scientific laboratories. This unit accommodates a range of devices from 750 mL bottles, microplates, cytological slide carriers, and microsample tubes. This centrifuge features an easy-to-read LED display with touch pad controls and can be operated manually or using on of the 35 programmable operations.

Specifications:

- Maximum relative centrifugal force: up to 4,630 Times Gravity

- Speed: up to 5,600 rpm

- Capacity: 3-liters (4 x 750mL)

- Speed Accuracy: up to ±10rpm

- Dimensions (H x W x D): 36 x 30 x 24inches (92 x 77 x 61cm)

- Weight: 270lbs (122kg)

- Power: 120VAC, 60Hz, 15A

The IEC Centra GP8R is a large-capacity model with an easy-to-clean membrane touch panel controller features a digital display of speed, run time, program number, rotor setting, and temperature. Speed can be controlled from 500 to 5300rpm in 10rpm increments. Temperature can be set from -5°C to +40°C in 1°C increments.

IEC Centra GP8R refrigerated tabletop centrifuge specifications

Speed Range 500 to 5300rpm

Max Capacity 4 x 750mL  

Dimensions 24”D x 17”H x 30”W

IEC Centra GP8-RF refrigerated centrifuge IEC GP8R IEC GP8RF IEC Centra GP8R Refrigerated Centrifuge used very nice

-with 4 well plate rotor holders and standard buckets rotor and various inserts for buckets

-3-liter ventilated centrifuge and performs separations 50-100% faster

-The IEC Centra centrifuge provides the powerful, large-capacity 4 x 750mL centrifuge with refrigeration

-The panel features digital display of speed/g-force, run time, program number, rotor/radius setting, and temperature.

-Operates at speeds up to 4600 rpm (depending on rotor & load). Speed can be set from 500 to 4600 rpm in 10 or 100rpm increments. Or you can enter the required g-force and the unit will automatically calculate the appropriate speed for you.

-Run time can be set up to 5 minutes in 1-sec. increments and from 5 to 360 minutes in 1-min. increments.

-Temperatures can be set from -5 to +40C in 1C increments. Actual temperature is displayed digitally on the control panel. The unit uses a CFC-free refrigerant to rapidly cool rotor chamber from ambient to 4C within 5 to 7 minutes faster than ever before.

-An over/under temperature alert ensures that temperature remains within specified range.

-The Centra-GP8R offers five acceleration and braking rates (plus a coast position) which can be used to optimize runs: fast for rapid separation, gentle for delicate samples.

-A fail-safe cover interlock system prevents operation of the centrifuge while the cover is open and releases only at the completion of a run. Imbalance sensors terminate runs at low speed and signal operator to rebalance load.

-A variety of operator error messages and self-diagnostic codes are available to speed problem solving and minimize downtime. Rugged all-metal housing, cover, and containment ring system.

- Centra-GP8R also accept rotors from IEC Model Centra-7/7R and Centra-8/8R centrifuges.

Package Quantity 1

All of our equipment is fully tested to perform at factory specifications before being shipped.

FEEL FREE TO CONTACT US WITH ANY QUESTIONS YOU MAY HAVE WE WILL RESPOND PROMPTLY!

Stock # 220308