SIMPLY ANOTHER ITEM BY  

You are bidding on a USED condition TEKTRONIX 465B OSCILLOSCOPE ACCESSORIES PROBES & K212 PORTABLE INSTRUMENT CART as you can see from the pictures.

Item Description / Product Information

Want a working, fully function potable scope? This is the one you are looking for! This 465B from Tektronix has all the features you need, 100Mhz, dual traces, dual time base, delayed sweep, advanced trigger system, external trig, ...... 

This oscilloscope cleaned and checked out in all modes. Scope has been performance tested and is working perfectly as you can see from pictures. 

This scope has dual traces with dual time bases, different amplitude on CH1/CH2 with A, A+B sweep.

This scope operates with a bright trace and plenty of brightness in reserve; no burn spots. All controls/buttons operated normally, very smooth without any intermittent problem and operate normally, measurement is within specifications. The vertical and horizontal amps are fully calibrated with crystal-based Oscilloscope Calibrator PG506, SG503, TG501 and function generator.

Photos are of the actual instrument you will receive and show it's overall good operating/physical condition. It does has some small scratch on case and normal wearing. 

IMPORTANT: THE CART WILL NOT BE INCLUDED IF SHIPPED VIA THE EBAY GLOBAL SHIPPING PROGRAM DUE TO THE SIZE AND WEIGHT LIMITATION! 

What is included:

• Tektronix 465B DMM44 100 MHz Oscilloscope
• Probes
• Manual
• Power cord
• DESCRIPTION

The Tektronix 465B was the industry standard in 100MHz portable oscilloscopes for many years and this instrument is ready to go to work for you.

Tektronix 465B Features :

• 100 MHz Bandwidth, Dual Channel.
• Vertical Sensitivity - 5 mV/div. to 50 V/div.
• Vertical Modes - Ch. 1, Ch. 2, Add, Alt., Chop, Ch. 2 Invert.
• Full-Range Calibrated Delayed Time Base with Precision Delay Time Control.
• Horizontal Sweep Speeds: .5 s/div. to .05 ms/div. (With x10 Mag.)
• Horizontal Modes - A, MIX, A INTEN, BYou are bidding on a refurbished Tektronix 465B Dual Channel 100 Mhz Oscilloscope. Serial number B063164.
  This instrument has been performance calibrated and adjusted by an accredited electronic technician .
  
  The 465B is the modernized and upgraded version of the famous 465, the most successful oscilloscope ever manufactured by Tektronix.
  The Tektronix 465B was the industry standard in 100MHz portable oscilloscopes for many years.
  
  Included are 2 new 100Mhz "1X-10X" probes with a complete set of tip accessories and an accessory storage pouch.
  Also included is a complete Operators/Maintenance manual on CD as high definition PDF files suitable for print-out.
  
  This scope has had an easy life and operates just as it did when new with a bright, sharp trace.
  All controls operate normally and calibration is within specifications.
  
  Photos show it's overall excellent condition as well as it's operation with dual traces, complex wave forms, dual time base, and operation in "X-Y" mode with a curve tracer for testing transistors, diodes, capacitors, resistors, and many other components.
  
  As photos show, this scope is in excellent working condition and is guaranteed NOT DOA.
  
  This 465B is a commercial grade instrument and ready to go to work for you.
  
  The scope will be professional packed for shipping via FEDEX ground.
  
  Payment is required within 72 hours of auction end.
  
  Thanks for looking and Happy Bidding...
  
  Tektronix 465B Features :
  
  - Bandwidth 100 MHz
  - Rise time 3.5 ns
  - Number of Channels 2 ch
  - Channel-Channel Isolation 100 dB Min.
  - Vertical Sensitivity 5 mV/div
  - Maximum Vertical Sensitivity 5 V/div
  - Vertical(or Deflection Factor) Accuracy 3 %
  - Input Coupling AC,DC,GND
  - Input Impedance 1 MOhm
  - Maximum Input Voltage 250 V(dc+p)
  - Main time base - lowest 20 ns/div
  - Main time base - highest 50 ms/div
  - B Sweep Time Base (low) 20 ns/div
  - B Sweep Time Base (high) 5 s/div
  - Time base Magnification factor (X10)
  - Timebase accuracy 2 %
  - Trigger Source External,Internal
  - Trigger Sensitivity 0.3 mV
  - Display Type CRT Monochrome
  - Display Size 13 cm

MADE IN THE USA!!!

This used TEKTRONIX 465B OSCILLOSCOPE ACCESSORIES PROBES & K212 PORTABLE INSTRUMENT CART is owned by EACH PROJECT Inc. and stored at our facility in Ann Arbor, MI.

Just so that we are clear on that, this is an item that has been tested.  As such it should work fine but if by an unlikely event does not and a problem shows up, we will accept full return within 14 days. Any purchase, even of brand new items entail a certain degree of risk.  If you Buy It Now your risk is limited to the shipping costs both ways. It is up to you to decide whether the risk level is acceptable to you, and if not you need to pass on this particular item.

Tests: UNIT CAME FROM A WORKING ENVIRONMENT, THAT'S WHAT WE WERE TOLD BY THE UNIVERSITY WHERE WE PICKED IT UP FROM.

.Other than what's displayed in the images accompanying this listing or mentioned in the description above, there are no manuals, instructions, additional parts or accessories.
Please do not assume something is included. If you don't see it, then it's not included. 

• DISCLAIMER: Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by bidding on this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer.

TO CHECK OUR EBAY STORE FOR OTHER ITEMS