SERVEND CED-30 SODA CARB NON 6 VALVE POST MIX DISPENSER WATCH VIDEO FREE SHIPPIN

This listing is for a used SERVEND CED-30 SODA CARB & NON-CARB 6 VALVE POST MIX DISPENSER as can be WATCHED IN THE VIDEO and also seen in the pictures.

IMPORTANT: THIS UNIT IS 1 PHASE 120 VOLT ELECTRIC AND WE BELIEVE IT IS WORKING PERFECTLY BUT SINCE WE DO NOT HAVE HOW TO CONNECT IT AND TEST IT WE ARE SELLING IT CHEAP AND AS IS WITHOUT ANY RETURNS, PLEASE WATCH THE VIDEO, CHECK THE PICTURES AND FEEL FREE TO ASK ANY QUESTIONS BEFORE COMMITTING TO BUY IT, WE WILL RESPOND PROMPTLY.

Unit came from a university cafeteria and has always been very well taken care of as can be WATCHED IN THE VIDEO and also seen in the pictures.

PLEASE FEEL FREE TO WATCH A VIDEO OF THIS UNIT POWERING UP BY CLICKING https://www.youtube.com/watch?v=gfApsOTptns

We did notice that the side keylock has a broken key lock inside. We managed to turn it all around and it turned without any problems. It seems to not affect function whatsoever since the unit did not power off nor on by turning that key.

As with all our items everything you see in the video and in the pictures is included, anything you see IS included, anything you don't see IS NOT included. 

COUNTER-ELECTRIC DESCRIPTION

The CED s are small compact chillers with a high-im- pact and corrosion-resistant stainless steel housing and may be island mounted or installed on a front or rear counter. The refrigeration assemblies are the drop-in- type that can be removed for service and maintenance. Adjustable syrup flow regulators, located on the dispens- ing valves, are easily accessible to control the Water to

Syrup Ratio (Termed Brix) of the dispensed product. All CEDs have electric dispensing valves.

INTERNAL COLD (IC) CARBONATOR CED

This CED Unit is equipped with a 1/3 H.P. refrigeration assembly and has a built-in cold carbonator. The car- bonator is located on the deck of the CED under the bonnet. The carbonator tank is located within the water tank. Installation requirements for operation are: Place- ment of CED on a countertop making sure the unit is level, installation of loose shipped parts, connection of drains, connection of plain water and syrup supplies, adjustment of CO2 regulators, fill water tank with water, and plug CED power cord into an electrical outlet.

EXTERNAL CARBONATOR (EC) CED

(Requires Connection to a Remote Carbonator)

This CED is equipped with a 1/3 H.P. refrigeration as- sembly and requires connection to an external Carbon- ator. Installation requirements for operation are: Place- ment of CED on a countertop making sure the unit is level, installation of loose shipped parts, connection of drain, connection of external carbonator, connection of plain water and syrup supplies, adjustment of CO2 regu- lators, fill water tank with water, and plug CED power cord into an electrical outlet.

NON-CARBONATED CED

This CED is the same as the external carbonator unit, except no carbonator is required. Installation require- ments for operation are: Placement of CED on a countertop making sure it is level, installation of loose shipped parts, connection of drains, connection of plain water including a booster system if necessary, syrup/ juice supplies, possible adjustment of CO2 regulators, filling water tank with water, and plugging CED power cord into an electrical outlet.

The CED 30 is a 6 valve unit set up to dispense a non- carbonated drink from the NO. 3 dispensing valve.

If you have any questions, please feel free to inquire BEFORE BUYING, we will respond immediately.

Stock # 212802