REFURBISHED BECKMAN OPTIMA LE-80K ULTRACENTRIFUGE 2Ti ROTORs WATCHVIDEO FREESHIP

Name: REFURBISHED BECKMAN OPTIMA LE-80K ULTRACENTRIFUGE 2Ti ROTORs WATCHVIDEO FREESHIP
Brand: EachProject
SKU: IF_77B6078D-3-1-4-1-1-1-2-1-1-1-1-1-2-1-1-1-2-1--1
Price: 12000.00 USD
Availability: InStock

$12,000.00 USD

Sale Sold out

Taxes included.

We're proud to offer a Great Operational Condition REFURBISHED BECKMAN OPTIMA LE-80K ULTRACENTRIFUGE with BECKMAN 50Ti 50 Ti 50,000 PLUS BONUS BECKMAN 70Ti 70 T 70,000 RPM Titanium ROTOR as can be WATCHED IN THE VIDEO and also seen in the pictures.

BUYER WILL RECEIVE 2 BONUS Ti TITANIUM ROTORs WITH THIS UNIT!!!

FEEL FREE TO WATCH A VIDEO OF THIS UNIT WORKING BY CLICKING: https://www.youtube.com/watch?v=vkFg6Q49ypo

Also includes the OPERATIONAL MANUAL.

* IMPORTANT: ULTRA CENTRIFUGES REQUIRE PROFESSIONAL INSTALLATION! IF BUYER NEEDS WE CAN ALSO HAVE ONE OF OUR FORMER BECKMAN TRAINED TECHNICIANS WITH OVER 25 YEARS WORKING WITH THESE SPECIAL ULTRA CENTRIFUGES SUPERVISE OR INSTALL IT FOR FREE IF IN SOUTHERN MICHIGAN OR NORTHERN OHIO. WE CAN INSTALL IT FOR A FEE TO OTHER LOCATIONS, THIS FEE WILL DEPEND ON BUYER'S LOCATION.

You Will Receive:

- Beckman Coulter Optima LE-80K Floor Ultracentrifuge (365668)

- x4 Feet

- Power Cable

- 1 BECKMAN 50Ti 50 Ti 50,000 RPM Titanium Centrifuge Rotor for Ultracentrifuge

- 1 BECKMAN 70Ti Rotor 70,000 RPM Titanium Centrifuge Rotor is also included with this sale!

- 120-Day Warranty

You Will NOT Receive the Wall Socket Shown in the picture, it is only shown so buyer can know the type of wall inlet he will need to have so as to use this Beckman Optima LE-80 UltraCentrifuge.

Fully Tested and Working Without Issue:

After its initial disinfection and inspection, our technicians tested the Beckman Coulter Optima LE-80K floor ultracentrifuge with the following results:

- Ran to 80,000 rpm: PASSED

- Temperature held at 2°C: PASSED

- No excessive noise or imbalance: PASSED

- Spun down properly: PASSED

- Performed inspection; no problem found: PASSED

Specifications:

Manufacturer: Beckman Coulter

Model LE-80K

Cat. No.365668

Serial No. COL97M21

Speed range 1,000 to 80,000 rpm

Time Up to 99 hours, 59 mins; HOLD

Temperature range 0 to 40° in increments of 1°C

Acceleration

Selection from two profiles: maximum acceleration from 0 rpm to set speed, or slow acceleration from 0 to 500 rpm, followed by maximum acceleration to set speed

Deceleration

Selection from three profiles: braking to 0 rpm, slow (full brake to 500 rpm followed by reduced braking to a gentle stop), or no brake

Power rating: 200/240V, 50/60Hz, 20A

IMPORTANT:AS CAN BE SEEN IN THE VIDEO AND ALSO IN THE PICTURES, THIS REFURBISHED BECKMAN OPTIMA LE-80K ULTRACENTRIFUGE ALSO COMES WITH THE FOUR FEET.

THIS UNIT RESPONDS TO ALL SETTINGS, THE DISPLAY DOES WORK AS CAN BE WATCHED IN THE VIDEO.

THIS UNIT CAME FROM A FEDERAL UNIVERSITY, HAS ALWAYS BEEN VERY WELL TAKEN CARE OF.

HAS BEEN FULLY REFURBISHED BY TECHNICAL ALTERNATIVES WHO SERVICES ALL CENTRIFUGES AT THE UNIVERSITY AND IS WORKING PERFECTLY AS SHOWN IN THE VIDEO AND THAT'S WHY WE OFFER A 120-DAY-WARRANTY ON IT!!!

IF BUYER WISHES WE CAN ALSO HAVE ONE OF OUR FORMER BECKMAN ENGINEERS INSTALL IT AT YOUR LOCATIONS FOR A FEE.

FEE WILL DEPEND ON BUYER'S LOCATION.

FREE SHIPPING TO ANY CONTINENTAL USA BUSINESS LOCATION WHERE BUYER CAN UNLOAD IT OFF THE DELIVERY FREIGHT TRUCK!

IF BUYER DOES NOT HAVE THE MEANS TO UNLOAD IT AT DELIVERY (NO DOCK or FORKLIFT) THEN THERE WILL BE A $150 SPECIAL LIFTGATED FREIGHT TRUCK DELIVERY FEE.

Similar Brand new units similar to these Retail new for over US$ 35.000,00 so this is the chance to buy one at a Great Deal!!!

Technical Information in Italics Blue below was taken from Manufacturer's website:

gmi-inc.com/product/beckman-optima-le-80k-ultracentrifuge/?srsltid=AfmBOorw756dcK3YDNQ1HDwJQBNeKUBEOydmP4dnuUCimSulYUKLbNz-

Product Description

Frequency-controlled, air-cooled direct-drive induction motor

CFC-free cooling system

Overspeed safety system

Dual purpose digital display

GMI Certified Pre-Owned (Eligible for a 1-Year Warranty)

The Beckman Optima™ LE-80K Ultracentrifuge offers the fastest separations possible in the minimum amount of time with its performance capability of up to 80,000 rpm. This versatile model is compatible with a wide range of superior rotors and tubes. Capable of rapid run times, the Optima™ LE-80 K is perfect for a broad range of applications.

Featuring a high tolerance of rotor imbalance, this Beckman centrifuge uses a frequency-controlled, air-cooled, direct-drive induction motor that requires no brushes or gears. Operators are assured of smooth and quiet performance with this externally forced-air cooled and internally oil cooled unit.

Equipped with easy-to-use, environment-friendly and microprocessor–based control cooling systems, the Beckman LE-80 K eliminated the use of CFCs and other dangerous liquid refrigerants. This Optima centrifuge is operated through a keypad control panel, and digital display which shows parameters including rotor speed, run time, rotor temperature, w2t value, and selected program number. The display has a dual purpose, indicating both actual values/conditions and set values.

Other features of the Beckman Optima™ LE-80 K centrifuge include automatic standby mode, overspeed and purge system, LED run indicators, and diagnostic messages. Its design includes a high strength structural steel chamber door with a solenoid interlock which prevents it from opening during operation. The LE-80K has an aluminum rotor chamber, coated with a chemical-resistant epoxy finish.

Technical Specifications

Dimensions (H x W x D) 47.5 in. x 37 in. x 26.5 in.

(120.7 cm x 94.0 cm x 67.3 cm)

Weight 1025 lbs (465 kg)

Maximum Heat Dissipation into the Room 1.0 kW (3400 Btu/hr)

Noise Level 57 dBa

Installation Category II

Pollution Degree 2

Set Speed 1000 rpm to 80 000 rpm in increments of 100 rpm

Speed Control Actual rotor speed will be +/- 50 rpm of the set speed (above 1000)

Speed Display Indicates rotor speed in increments of 10 rpm at speeds below 1000 rpm, and increment of 100 rpm at speeds above 1000 rpm

Set Time Up to 99 hours and 59 minutes; HOLD for runs of unspecified length

Time Display Indicates time remaining in timed runs, time elapsed in HOLD runs, or estimated time remaining in ?2t runs

Rotor Temperature

Set Temperature 0 to 40 deg C in increments of 1 deg C

Temperature Control +/1 1 deg C of set temperature

Display Indicates rotor temperature in increments of 1 deg C

Stability Within 0.3 deg C of set after equilibrium is reached

Acceleration Selection from two profiles: maximum acceleration from 0 rpm to set speed, or slow acceleration from 0 to 500 rpm, followed by maximum acceleration to set speed

Deceleration Selection from three profiles: full dynamic braking to 0 rpm, slow (full brake to 500 rpm followed by reduced braking to a gentle stop), or no brake

Operation Standard, programmed, or delayed start; instrument memory can store up to nine individual programs

Revolution Corner Displays accumulated total number of rotor revolutions in tens of thousands

Barrier Ring 41-mm (1.63-in.) heat-treated steel alloy armor ring surrounded by a 12-mm (0.50-in.) steel vacuum chamber to provide full protection for the operator

Door 17.5-mm (0.69-in.) high-strength structural steel

Vacuum Diffusion pump in series with a mechanical pump reduces chamber pressure to below 5 microns (0.7 Pa)

SHIPPING IS FREE TO BUSINESS LOCATIONS (not home business) with a dock or a forklift to unload it off the truck. If you need a special Liftgated delivery there will be a $150 delivery fee charged.

Shipping is also Free if buyer can pick it up at the local Freight Terminal we ship it to.

IMPORTANT: SCHOOLS, CHURCHES, FARMS AND RESIDENCES ARE NOT CONSIDERED BUSINESS LOCATIONS BY ALL FREIGHT CARRIERS AND WILL HAVE THE $150 DELIVERY FEE.

Additional images are available upon request. All items can be viewed in person at our showroom in Toledo, OH.

STOCK # 242509