PRECISION SET-N-SERVE ICED SALAD FOOD COLD BAR BUFFET DSCRBU 326 FREE SHIP

PRECISION MOBILE COLD SERVING UNIT BUFFET STYLE REFRIGERATED COLD PAN / SET-N-SERVE 

ICED SALAD FOOD COLD BAR BUFFET 2 SIDE TRAY & HOOD as can be seen in the pictures.

INTERNAL REFRIGERATED PAN DIMENSIONS ARE: 54" 1/4' long x 20" wide x 6" 1/8' high up to the 

counter

Side Trays are 9" 3/4' wide when assembled up

Description:

Keeps salads, sandwiches, desserts....chilled entrees or appetizers, fresh, crisp and appealing throughout the serving occasion. Your customers will see and taste the difference.

This attractive Designer Series unit can stand alone or become an integral part of your total serving system.

Quality construction, Precision's exclusive Reversa-Panel and heavy gauge Stainless Steel tops promise years of cost efficient, trouble-free 

service.

DESIGNER SERIES FEATURES:

. Reversa Panel easy access, reversible, interchangeable designer panels - available as an accessory

. Stainless Steel LEVER-LATCH locking system

. Adjustable height, leveling casters 

. Concealed, heavy-duty, non-marking neoprene wheels with locking brakes

. Solid, die-cast brackets

. Unibody construction with 45 degree designer look supports

. Durable Stainless Steel tops

. Easy access flip top breath guards

. One person room-to-room mobility

. Fits through standard 36" doors

. Most flexible decor package in the industry

TOP: Top constructed of 18 gauge, type 304 stainless steel, die-formed, welded, buffed and polished to a uniform finish.

The Precision Edge runs the full length of the top and consists of a double 45 degree angle with a polished finish and also to provide extra durability and 

aesthetic enhancement.

LINER: The inner liner shall be 18 gauge, type 304 Stainless Steel, one piece construction, all welded, ground and polished to a uniform finish. 

INSULATION: The pan is fully insulated with high density polystyrene, 1" thick on all sides, 1" 1/2' thick on the bottom and enclosed with a 22 

gauge galvanized steel outer liner.

BODY: End mullions are die-formed, 18 gauge paint grip steel, all welded box beam construction. Interior sides are enclosed with 20 gauge paint 

grip Steel panels attached to the end mullions. End mullions are joined at the top, front and rear by a 6" 1/2' apron running the full length of the 

unit. Corner sections are formed with 45 degree angles on all sides for the designer look. End mullions are joined at the bottom with a full length 

angle iron frame. Steel surfaces are finished with Permakote Urethane Based Paint.

ALL SIDES: Constructed of rigidized honeycomb material with plyshield plywood stringers. Panel is framed with 5/8" x 1" polyethylene and a 

plastic laminate front. Rear is finished with a backing sheet to insure watertight integrity. 45 degree designer corners are painted with a 

Permakot urethane based paint. Solid color mica panels on the sides.

REFRIGERATION SYSTEM: A 1/3 HP self-contained condensing unit with a hermetically sealed compressor is provided along with a factory pre-

set temperature pressure control, which is field adjustable. The condensing unit is provided with an enclosure of 18 gauge steel.

ADJUSTABLE CASTERS: N.S.F. listed, 5" diameter, non-marking neoprene rubber tired swivel casters. Two casters have foot operated locking 

brakes. All Designer Series units feature Precision's exclusive adjustable height, leveling casters.

ELECTRICAL: 15 amp, 120 volt, 60 cycle, single phase operation with an illuminated on/off switch located on the operator's side and a 6-foot 

long, 3-wire cord and plug (NEMA-5-15P). A cord holder is provided, under the end mullion on operator's right.

INCLUDED ACCESSORIES:

. Tray slide, 12" wide, solid, ribbed, all Stainless Steel fold down with laminate inlay on front edge.

. Buffet Canopy, features Precison's unique flip-top sneeze guard. 

Canopy body is of millwork construction with plastic laminate finish. Stainless Steel top with highlighted edge and brackets; 

. Fluorescent light under canopy.

. Stainless Steel legs with adjustable feet, in lieu of casters.

. Reversa-Panel an alternate plastic laminate is substituted for backing sheet on the rear.

It's in VERY GOOD cosmetic condition with some scratches/scrapes from use.  

Tested and working PERFECTLY!!!!