PMS 600 PLANT MOISTURE STRESS METER PRESSURE CHAMBER FREE SHIP

This listing is for a PMS 600 PLANT MOISTURE STRESS METER PRESSURE CHAMBER as can be seen in the pictures. 

- 120V Input, 0-140VAC Output 15 Amps

Picture is actual item buyer will receive.

This PMS 600 PLANT MOISTURE STRESS METER PRESSURE CHAMBER has been fully tested and is working perfectly and that's why we offer a 90-DAY-WARRANTY on this unit!!! 

PLANT MOISTURE STRESS 

FREE USA SHIPPING ALSO!!!

TECHNICAL INFORMATION IN ITALICS BLUE BELOW WAS TAKEN FROM THE WEB: 

pmsinstrument.com/products/model-600-pressure-chamber-instrument/

PMS Instrument 600 Plant Moisture Stress Pressure Chamber Tester

Model 600 Pressure Chamber Instrument is an old favorite we have built for over 50 years.   

The instrument can be connected directly to a Nitrogen Cylinder with 207 Bar/3000 PSI pressure.

Instrument comes fitted with our most popular sealing gasket size – 1/4 inch Compression Gland Gasket and Insert. This gasket will seal a sample that is up to 1/4” diameter. If you need other sealing options such as bladed grass or other semi-round sizes check our other options.

This is an excellent choice for routine water measurements for crop plants and light research in plants with little to moderate water stress. For extensive research projects you might consider a Model 1000 or Model 1505D due to the large range of operating pressure. The instrument requires a compressed nitrogen source. You can use it in a lab or green house with a large cylinder or buy our light weight Portable Tank to allow for field work.

For more information about how to use the Model 600, please check our Resources Page.

Model 600 Specs

Maximum Operating Pressure 40 bar

Chamber Construction Anodized Aluminum

Read-out Bourdon Tube Gauge (Bar-PSI Scale)

Size (L x W x H) 13 × 11 × 10 inches

33 × 28 × 24 centimeters

Weight 14 Lbs / 6 Kg

Gauge 4.5” Diameter Gauge

  0.5% accuracy

  40 bar (4 Mpa) range

Instrument comes complete with:

1/4 Inch Compression Gland Sealing System, 5 Extra 1/4 Compression Gland Gaskets, 6 foot Filling Hose, 1 – Solid Lab Stopper for instrument testing, O-Ring lubricant and Lithium Grease, 11/32 inch wrench and 3/32 inch Allen Key for Control Valve Adjustment, Safety Glasses and a color Operating Instructions Manual.

Recommended Accessories

Portable Tank,

Extra Compression Gland Gaskets,

Volume Reducer – depending on plant type,

Lighted Hand Lens or

Instrument Mounted Eye Lens.

Note: Necessary accessories will depend upon users application.

Helpful Links

Filling the Portable Tank

What it should look like when it’s all hooked up

What it should look like when it’s all hooked up can be seen by GOOGLING the following link:

pmsinstrument.com/resources/what-it-should-look-like-when-it-s-all-hooked-up/

Sometimes we’re asked, “What does it look like when it’s all hooked up?” If you have a Model 600, 670, 1000, 1505D, 1505D-EXP then you will need some sort of external nitrogen source. If you have the Portable Tank you will need to fill it with nitrogen. 

We received this unit from a Federal University, we did power it up and it DOES work PERFECTLY!!! 

Used and in excellent working order

FREE USA SHIPPING!!!!

INTERNATIONAL BUYERS PLS CONTACT US FOR SHIPPING QUOTE!!!

Stock # 221308