This listing is for a Great Used Condition INTRA AORTIC BALLOON PUMP ARROW 2 WAVE IABP CARDIAC as can WATCHED IN THE VIDEO and also be Seen in the Pictures.
IMPORTANT: THIS IS A UNIQUE DEAL, BUY ONE COMPLETE ARROW 2 AND GET TWO UNITS, ONE WITH AND ANOTHER ONE WITHOUT THE DISPLAY EXACTLY AS SHOWN AND SEEN IN THE PICTURES.
SO YOU CAN ACTUALLY KEEP ONE IN ONE PLACE AND SIMPLY TAKE THE MONITOR TO THE OTHER LOCATION AND USE IT THERE!!! OR SIMPLY KEEP THE SECOND UNIT AS A BACK-UP UNIT!!!!
NO ONE CAN BEAT THIS INCREDIBLE OFFER!!!! BUY 1 UNIT AND GET ANOTHER ONE (WITHOUT THE MONITOR, YOU WILL GET ONE MONITOR ONLY) SO YOU CAN USE BOTH AT TWO DIFFERENT LOCATIONS!!!
FEEL FREE TO WATCH A VIDEO OF THIS SPECIFIC UNIT WORKING PERFECTLY BY CLICKING HERE!!!
We copied Manufacturer's Technical information on this unit and it can be seen below:
AutoCAT®2 IABP
Delivering a New Level of IABP Reliability and Ease of Use
AutoCAT®2 Relies on the AutoPilot™ Mode of operation to achieve its high level of performance.
Automatically selects ECG/AP signal, sources, trigger mode, and timing method as well as timing settings
Automatically changes settings to optimize assist
Proprietary software sets timing to correspond to individual patient needs
Proprietary deflation timing management
AutoPilot™ Mode consistently maintains triggering and timing — Proprietary Best Signal Scoring software brings automaticity to a new level of reliability
DISPLAY
• Type: Color LCD flat screen
• Channels: Three-channel multicolor waveforms
§ ECG: Green trace with white highlight on assisted portion
§ AP: Red trace calibrated for direct reading of AP, white highlight on assisted portions when in Operator Mode
§ Balloon pressure: Blue trace calibrated in mm Hg and displayed continuously
• Timing reference display: Numerical timing settings in both operating modes as well as a bar graph displaying inflate/deflate events in Operator Mode
• Cursor: Measurement of AP and balloon pressure waveforms
ALPHANUMERIC DATA
• Patient hemodynamics: Heart rate, AP—systolic, augmented, diastolic, and mean arterial. When in 1:2 or lower assist ratio the assisted values are displayed in white and the unassisted values are displayed in yellow
• Displayed parameters: ECG source and gain state, alarm status with timer, ON BATTERY indication, operation mode selection, AP alarm parameter and limit, timing settings, helium tank level, arrhythmia detection, and timing status
• Operations status: Operational mode, trigger mode, helium tank gauge, alarm/battery charge status, balloon volume
• Diagnostic alarm/help messages: Preprogrammed troubleshooting prompts/help
STRIP CHART RECORDER
• Recorder: Dual-channel dot matrix: Dot density 400 dots/inch, 25 mm/s
• Waveforms: ECG, AP, or balloon pressure (one or two recorded)
• Alphanumeric: Operational mode, trigger mode, ECG lead/source, AP source, AP alarm status, timing settings, assist ratio, balloon volume, timing method, arrhythmia status, alarm condition, date, time, patient hemodynamics
DISPLAY FREEZE
• Freezes approximately 7 seconds of patient data on screen
PATIENT SIGNAL INPUTS
• ECG: 5 lead skin cable (I, II, III, aVR, aVL, aVF and V) High level monitor input (0 to 5 V)
• AP: AP transducer (Spectramed or equivalent), 50 mV/V/cm HgHigh-level monitor input (1 V 100 mm Hg)
FEEL FREE TO SEE MANUFACTURER's TECHNICAL DATA INFORMATION BY CLICKING HERE!!!
Fully tested and working perfectly.
This unit came from a Federal University and has been very well taken care of.
