HOBART LXIC COMMERCIAL AUTOMATIC UNDERCOUNTER DISHWASHER WASHING PERFECTFREESHIP

This listing is for a GREAT Used Condition HOBART LX30 UNDERCOUNTER COMMERCIAL DISHWASHER as can be seen in the pictures.

FULLY TESTED AND 100% WORKING GUARANTEED

This unit Powers up and works PERFECTLY as it should!

FEEL FREE TO READ TECHNICAL INSTRUCTION MANUAL BY CLICKING http://kitchen.manualsonline.com/manuals/mfg/hobart_corp/lxi_series_dishwasher_models_lxic_ml130016_lxih_ml130017_lxigc_ml130018_lxigh_ml130019.html?p=8

The LXi Series dishwashers are fully automatic, front-loading dishwashing machines that are capable of 30 racks per hour.

All LXi Series dishwashers shut down automatically 4 hours after last use to conserve energy.

This dishwasher includes the ECOLAB ECO-TEMP 300 Sense-A-TempTM to insure proper hot water temperature during rinse.

THE ECOLAB ECO-TEMP 300 PUMPS THE DETERGENT INTO THE MACHINE AND THE HEATER TO HEAT THE WATER TO A HIGH TEMP.

Standard equipment includes two 20" x 20" racks, electronic controls, drain pump, fill hose and drainhose.

Fresh water rinse; low-temperature, chemical-sanitizing for use with 6% sodium hypochlorite solution (bleach) as the sanitizing agent.

LXiC Fresh water rinse with a built-in 70°F rise booster heater. 

This allows an incoming water temperature of 110°F.

Water Supply

A water hammer arrestor (meeting ASSE-1010 Standard or equivalent) should be installed (suppliedby others) in the common water supply line at the service connection.

Water must be proper hardness. 

Higher hardness may cause excessive formation of lime scale.

The plumber connecting this machine is responsible for making certain that water lines are THOROUGHLY FLUSHED OUT BEFORE connecting to the dishwasher. 

This "flush-out" is necessaryto remove all foreign matter, such as chips (resulting from cutting or threading of pipes) pipe jointcompound from the lines; or, if soldered fittings are used, bits of solder or cuttings from the tubing.

Debris, if not removed, may lodge in the dishwasher's plumbing components and render them inoperative. 

Water supply requirements are as follows: 

TEMPERATURE 140° F Minimum

FLOWING PRESSURE 15 to 25 psi

If flowing pressure exceeds 25 psi, a pressure reducing-valve (not supplied) must be installed in the supply line.

CAUTION: The water pressure regulator must have a relief bypass. 

If flowing pressure is less than 15 psi, improper machine operation may result.

A manual shutoff valve (not supplied) should be installed upstream of the fill hose to accommodate servicing the machine.

The LX Series dishwashers are fully automatic, front-loading dishwashing machines which are equipped with a 3 /4 horsepower electric motor. 

All LX Series dishwashers shut down automatically four hours after last use to conserve energy. 

Standard equipment includes two 20" x 20" racks, electronic controls, pumped drain, fill hose and drain hose.

Some Product Features/Benefits:

* Strong construction consisting of 304 Series stainless steel provides years of reliable service and durability.

* Uses only 1.2 gallons of water per rack.

* Two minute totally automatic cycle including push button start, automatic fills,  and automatic pumped drain for both floor and wall drain installations.

* Fresh water rinse rather than a recirculating rinse eliminates wash water contamination.

* Simplified controls allow easy access for service as well as normal operation.

* Manual override for extended wash and deliming purposes.

- Operating Capacity: 24 racks per hour, or 600 dishes/glasses per hour.

* Electrical Specifications

- 115/230 Volts

- 0.31/0.16 Amps

- 50/60 Hz

- 1 Phase

- 13.2 Amps

- 3/4 HP

- Approx Size : 24" w, 23" d, 39" h

- Approx Weight : 200 lbs.

NSF approved, UL listed (Disk K)(A)

Item is used and guaranteed in great working condition. As you can see from the pictures you could clean this unit up with a Lime Cleaner or not, we do not think it necessary since the unit is working perfectly as it should but it's at buyer's discretion.

Stock 251117