FOLLO STABILIS HELP ARM by FUTURA PHYSIOTHERAPY SHOULDER MUSCLE SCLEROSIS SPINE

You are bidding on a Great used condition FOLLO STABILIS HELP ARM by FUTURA PHYSIOTHERAPY SHOULDER MUSCLE SCLEROSIS SPINE AS CAN BE SEEN IN THE PICTURES.

It is in EXCELLENT working condition. This FOLLO STABILIS HELP ARM came from a Federal University Hospital and has been tested to be in excellent working condition.

FEEL FREE TO CHECK MANUFACTURER's DATA SHEET IN GERMAN by clicking: https://www.originalnorsk.com/shop/ergotherapie-arbeitstraining/schwedisch-helparm.html

Swedish Help Arm

The Follo Stabilis Help Arm is a functional aid for patients with paresis of the shoulder muscles.

An excellent tool for use during occupational therapy, to help in teaching the patient numerous kinds of productive work.

The Follo Stabilis Help Arm can be used for the following diagnos in which the shoulder muscles may be impaired; cervical spine injuries, shoulder nerve injuries, hemiplegia, multiple sclerosis, and certain forms of rheumatoild arthritis.  

Part No: Std. Accessories:

104-220-00 8  pair of slings

Height: 6 feet (180cm)

Width: 30" inches (75cm)

Depth: 38" inches (70cm)

Weight: 62 lbs (28kg)

Information taken from the Manufacturer's website about a similar unit can be read as follows in Italic:

FOLLO Unpacking / Installation: 

1. Make sure that the product has not been damaged (hurt) in transport. 

2. Fit the walker according to assembly instructions. 

3. Assemble all the accessories that have been ordered. 

4. Test all the various functions and setting options. 

Security Information: 1. If there is any damage or defects in the unit should not be used until these are rectified. 

                      2. The unit is designed for indoor use. 

                      3. When adjusting height and depression, make sure that nothing is pinched between the frame parts. 

                      4. The unit must not be modified or used with other accessories than the original. Producer responsibility for CE marking terminates any self-modification. 

                      5. Instructions for use: Height Control of unit is adjusted with the controller to the desired height. 

                      Height is adjusted by loosening the clamp handle on the front tube. Adjust the top section to the correct height and tighten the clamp handle. Make sure the clamp handle is securely tightened.

                      Please note: support handles follow the settings and facilitates appropriate support and use. 

                      Wheels locking: The rear wheels have locks. To unlock the brakes press down the "locking" with the foot. To release the brakes tilt "locking" up again with the toe. 

                      Maintenance / inspection: Control at regular intervals (for example every third months): 1. That all screws are tight and all functions are working properly. 2. That there is no damage or wear and tear on the unit and the unit is stable.

                      6. That the telescopic tubes are lubricated regularly (with a thin layer of, for example, Vaseline or silicone). The unit should be wiped off with a slightly moist cloth. 

                      Reconditioning: Reconditioning of the product must be performed by professionals. 

                      Disassembles easily by removing the bolts and nuts due to its groundbreaking design. 

                      After cleaning / disinfecting, wipe product carefully so that moisture dislodges. 

                      It is very important to inspect unit for moisture. When the product is dry, Telescopic tube must be lubricated with silicone spray and top frame is moved up and down a few times so that the parts slide easily. 

                      Check the sideway adjust alignment to see if they are in place. 

                      Replace worn parts and ordered by the supplier

                      All worn / damaged Information - and warning labels must be replaced. These ordered from the supplier. 

                      The product assembles in accordance with groundbreaking design. 

                      The stand etc. are metal.

Stock # 14182