This listing is for a WORKING PERFECTLY: THERMO FISHER SCIENTIFIC Model 6858 2.5 cubic feet ISOTEMP 6858 MICROBIOLOGY GRAVITY INCUBATOR STAINLESS STEEL INTERIOR as can be seen in the pictures.
The interior of this unit looks as if it has never been used, that's how nice it is.
FREE USA BUSINESS SHIPPING!
Ideal for microbiological incubation and heated storage
Unit came from a federal university and has been fully tested and that's why we offer a 90-DAY-WARRANTY.
This FISHER SCIENTIFIC 6858 GRAVITY ISOTEMP 2.5 CubFeet St Steel INCUBATOR always been very well taken care of as can be seen in the pictures.
THIS UNIT HAS BEEN FULLY TESTED, TEMPERATURE ROSE FAST, FURIOUSLY and remained at top temperature throughout the program.
Product Description - General Information taken from Manufacturer's Website on this THERMO FISHER SCIENTIFIC 6858 Incubator can be read in ITALICS below:
Fisher Scientific Isotemp 6858 Incubator Specifications:
Temperature Range: 30°C to 75°C
Temperature Uniformity: ±0.7°C at 37°C
Resolution/Sensitivity: ±0.1°C
Recovery Time: 2 minutes
Air Changes Per Hour: 4
Capacity: 2.5 cubic feet
Chamber Dimensions (W x D x H): 17.5 x 13.5 x 17.5 in
Exterior Dimensions (W x D x H): 26 x 24 x 27 in
Electrical Requirements: 120V, 50/60Hz, 7.2A
Manufacturer Name: Thermo Fisher Scientific
Incubator with gravity flow circulation provide accurate, efficient heating for routine laboratory procedures: drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody tests, microbiological determinations, crystallization studies and more.
Electrical receptacle inside (5A at 120V) to plug in a stirrer, shaker or other apparatus.
Easy to operate Microprocessor control|Controls are conveniently located at the top of the incubator chamber|
Keypad with arrow keys to increase or decrease set point temperature in 0.1°C increments|
Over-temperature value is automatically set at 3°C above set point|
PID controller comes with fixed parameters so no tuning is required|
Circuit breaker protects incubator from power surges;
Designed to stack two units|
Big three-character LED display Digits display actual temperature to nearest 0.1°C
Display shows current value for set point temperature|
HEAT indicator light cycles on and off to show when incubator heaters are on|
ALARM indicator lights up if temperature exceeds overtemperature limit;
Backup controller maintains temperature at 3°C above setpoint;
Safety backup built into software|
Small, medium and large workload capacities
Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement|
Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds eleven|
Low-maintenance incubators with inner and outer doors
Cabinet has durable, enamel-coated steel exterior|Extruded aluminum trim has acrylic powder coating|
Chamber is easy-to-clean stainless steel|
Low-watt-density heater elements are designed for long life|
Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss|
Outer door opens to 180° for unhindered access and features two grabber-type latches|
Inner door is tempered glass|
Steel shelves are 17.37 in. wide and 16.75 in. front-to-back (44 x 42.5cm)|
Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation.
Incubator Isotemp Standard Laboratory 2.5 cu.ft.
Maximum temperature 75°C
Single set point digital control
Inner glass door for minimal disturbance while viewing samples
Stackable, no tools or kit required
Access port standard
Stainless Steel interior
CSA certified
Specifications
Convection Technology Gravity
Temperature Range Ambient +7 to 75°C
Plug Type Nema 5 - 15 US
Temperature Stability At 37°C: ±0.3°C
Temperature Uniformity At 37°C: ±0.8°C
Manufacturer: Fisher
Temperature Range: 30-75 Degree C
Type: Standard Laboratory
Features and Benefits: Microprocessor control Controls are conveniently located at the top of the incubator chamber
Keypad with arrow keys to increase or decrease set point temperature in 0.1°c increments
PID controller comes with fixed parameters so no tuning is required
Circuit breaker protects incubator from power surges;
As with all our items everything you see in the pictures is included, anything you don't see IS NOT included.
If you have any questions, please feel free to inquire BEFORE BUYING, we will respond immediately.
Stock # 191602
