This listing is for a WONDERFUL WORKING CONDITION ELEKTROR HRD60-FU 105/6.5 HIGH PRESSURE BLOWER 3-PHASE Baldor Motor as can be seen in the pictures.
- 8.8 HP / 6230 RPM
CUSTOMIZED ASSEMBLY ON TOP OF CART WITH WHEELS FOR EASY MANEUVERABILITY as can be seen in the pictures!!!
IMPORTANT: This unit came from a Federal University, has been fully tested and is Guaranteed Working Perfectly and that's why we offer a 90-DAY-WARRANTY!
Information below in Italics Blue below was taken from the web:
elektror.com/en/product/hrd60fu-fuk-105/
Elektror HRD/FU/FUK High Pressure Blowers with Frequency Converter
According to Technical Specifications these motors are designed to convey only gaseous media, strictly non solids!!! Any solid material or impurities in the media to be used must be filtered before entering this blower.
Volumetric flow rate (m³/min): 22
Total pressure difference (Pa): 11000 - 11400
FU/FUK series devices allow the infinitely variable speed regulation of the induction motors used. The speed can be set from 0 to the max. possible speed typical for the device.
No derating is required in the entire speed range. In the case of devices in the FUK series, the frequency converter is connected to the motor. The enclosure is IP54.
The max. ambient temperature can range up to 60 degrees Celsius.
Devices in the FU series require a separate frequency converter, which is normally accommodated in a switch cabinet.
The types 1 T FUK-105/0,9 to HRD 65 FUK-100/7,5 are deliverable with build up frequency converter.
Comes with a Baldor-Reliance Super E Motor
INSTRUCTIONS MANUAL: dometrics.com/files/elektror/016309_HRD_2sprachig_BRD_ENG.pdf
PRODUCT OVERVIEW: dometrics.com/files/elektror/elektror_product_overview.pdf
Stock # 220108
