This listing is for a BRAND NEW Condition EDWARDS PD3 PLATE DEGASSER VACUUM CHAMBER FILM for ELECTRON MICROSCOPY as can be seen in the pictures.
IMPORTANT TO NOTE: THIS UNIT CAME FROM A FEDERAL UNIVERSITY, WAS TAKEN OUT OF THE BOX AND THAT'S WHY IT SHOWS MARKINGS ON IT BUT IN FACT IT HAS NEVER BEEN USED, 100% BRAND NEW! That's why we offer a 90-DAY-WARRANTY!
INCLUDES THE INSTRUCTIONS MANUAL as can be seen in the pictures!
Technical information in BLUE below was taken from manufacturer's website by GOOGLING the following link: shop.edwardsvacuum.com/products/e08578000/view.aspx
Overview
E08578000
The Edwards PD3 Plate Degasser is suitable for degassing photographic films and plates, prior to their use in electron microscopes.
This gives the advantages of reduced pump down times and less contamination to the microscope column.
This product is supplied as a chamber only. NO pump is supplied.
Technology
Chamber construction
The stainless steel chamber has internal dimensions designed to accommodate the largest photographic films and plates normally used in today's electron microscopes. The chamber is fitted with a full width hinged door with elastomer seal. A vacuum gauge and an air admittance valve are provided.
Versatile mounting
The chamber can be mounted horizontally or vertically above the rotary pump. In addition, more than one chamber can be mounted on the pump for increased capacity. Depending on the configuration selected for a multi-chamber installation further pipeline fittings may be required.
Features and Benefits
Large capacity stainless steel chamber - 164 ´ 164 ´ 340 mm
Chambers can be added to increase capacity
Hinged door with elastomer seal
Mounted on standard Edwards direct-drive vacuum pump
Fitted with NW fittings for versatility
Uses small floor area
Technical Data
Chamber size 164 mm x 164 mm x 340 mm (internal)
6.5 in x 6.5 in x 13.4 in (internal)
Overall size 630 mm x 190 mm x 450 mm
24.8 in x 7.5 in x 17.7 in
Weight 30 kg / 66 lbs
STOCK # 220907
