*100% WARRANTY* JABSCO 12290-0271 DIAPHRAGM PUMP 5.9 gpm WATCH VIDEO FREE SHIP

This listing is for a Wonderful Operational Pre-owned Condition JABSCO 12290-0271 DIAPHRAGM PUMP 5.9 gpm as can be WATCHED IN THE VIDEO and also seen in the pictures. 

FEEL FREE TO WATCH A VIDEO OF THIS UNIT WORKING BY CLICKING: https://www.youtube.com/shorts/zxZ9xBhaxnE

The unit came from a Federal University and has ALWAYS been very well taken care of as can be seen in the pictures. 

This JABSCO 12290-0271 DIAPHRAGM PUMP 5.9 gpm FREESHIP is GUARANTEED to perform at factory specifications and that's why we offer a 90-DAY-WARRANTY on this unit!!!

Technical Information below in BLUE ITALICS was taken online from Manufacturer's website:

pumpagents.com/JabscoPumps/12290-0271.html

Applications

Designed as a low cost pump for transfers, circulation, spill returns, filtration and filling line use. Easily handles pure solutions, foaming liquids, emulsions, suspended solids and ferments with viscosities less than 500 SSU. Because the plastic pump is resistant to corrosion and metallic contamination, it is widely used for pumping photo chemicals, plating compounds, lab solutions, pharmaceuticals, cosmetics, weak acids, alkalies, liquid fertilizers, insecticides, dyes, detergents, waxes and many more.

The Jabsco 12290-0271 is a phenolic plastic Flexible Impeller pump with a Neoprene Impeller, 5/8 Inch OD for Hose Connections Ports, coupled to a 1/6 Horsepower, 1750 RPM, 115 Volts, 60 HZ Motor. SELF-PRIMING Vertical dry suction lift of up to 10 feet (3 m) for neoprene impellers. Pump will produce suction lift up to 15 feet (4.5 m) when wetted. TEMPERATURES Impellers are suitable for service as follows: Neoprene impeller 45 degrees to 180 degrees F (4.4 degrees to 82.2 degrees C). Flow rate: up to 5.9 USgpm, maximum head 30ft (13psi). Use where corrosion resistant phenolic or glass-filled expoxy material, self-priming and debris tolerance is desired. Nitrile impeller is ideal for oil based products.

Unit depends on liquid pumped for lubrication. Do not run dry for more than 30 seconds. Lack of liquid will damage the impeller and other pump components. When corrosive fluids are handled, pump life will be prolonged if pump is flushed with water after each use or after each work day.

Features :

 Pump Body:Phenolic Plastic Impeller:Neoprene Port Size:Ports are 5/8 Inch OD for Hose Connections Motor Specs :1/6 Horsepower, 1750 RPM RPM, 115 Volts.

Product Specs :

Easy to service and maintain.

Handles hard and soft solids without clogging.

Non pulsating flow

All of our equipment is fully tested to perform at factory specifications before being shipped.

Full 90-Day Warranty

The picture is the actual item buyer will receive.

FREE USA SHIPPING ALSO!!!

INTERNATIONAL BUYERS PLS CONTACT US FOR A SHIPPING QUOTE!!!

Stock # 232003